Resin-saturated pipe liner laid out at a junction ready to be pulled through
No-Dig Pipe Relining · Melbourne

Rebuild the pipe.Leave the ground alone.

Cured-in-place lining turns a cracked, leaking, root-invaded pipe into a continuous jointless one without opening the ground above it. One access point, one crew, usually two days.

Or speak to a relining specialist now — (03) 9059 2707
  • 50yr
    Liner warranty
  • 1,300+
    Five-star reviews
  • 25+
    Years in Melbourne drains
  • 130+
    Suburbs covered
VBA licensed #43464Master Plumbers #504231Fixed price before we startSame-day CCTV inspections
01 — Depth 0.4m

What this actually is

A liner is not a patch. We saturate a felt sleeve in two-part epoxy resin, winch it into the damaged run, inflate it hard against the old wall and leave it to cure. What sets is a structural pipe inside the pipe — a continuous one, with no joints, no mortar and nothing for a root to find.

That matters more in Melbourne than most cities. The reactive clay under the eastern and bayside suburbs moves enough every summer to work a terracotta joint apart, and the street trees do the rest. Replacing a section fixes that section. Lining the run fixes the run.

Not sure which of our services you need? Start with a CCTV drain inspection — it is free with any quote and it decides everything else.

Cured green pipe liner standing beside the drain relining van on a Melbourne job
On site — Melbourne
02 — Depth 0.9m

Where lining beats digging, and where it does not

Line it

  • Cracked, fractured or hairline-split pipe that still holds its shape
  • Displaced or open joints letting roots and groundwater in
  • Runs under a driveway, slab, pool, deck or established garden
  • Long terracotta runs with damage in several places
  • Boundary traps and junctions that keep catching debris
  • Pipes you cannot reach without a permit or a neighbour's consent

Dig it

  • A fully collapsed section — there is no wall left to form against
  • A pipe crushed flat by subsidence or a vehicle load
  • Severe back-fall where the grade itself is the problem
  • A run so badly offset the camera cannot pass
03 — Depth 1.5m

How the job runs

01

We look before we quote

A high-resolution camera goes down the line so we can measure the damage, find the depth and confirm relining is actually the right call. Thirty to ninety minutes. You keep the footage whether you book the work or not.

CCTV footage showing tree roots growing through a joint in a Melbourne sewer pipe
Step 01
02

The pipe gets cleaned out

Roots, scale and debris are cut back with a high-pressure jetter until the inside wall is bare. A liner can only bond to a clean pipe, so this step is not optional and it is where cheap operators cut corners.

Plumber working epoxy resin into a green pipe liner before installation
Step 02
03

A new pipe is formed inside the old one

A felt liner saturated in epoxy resin is pulled through, inflated hard against the wall and cured in place. Junctions are reinstated with a cutter. Nothing is excavated and nothing is cut.

Resin-saturated pipe liner laid out at a junction ready to be pulled through
Step 03
04

We camera it again and hand it over

A second inspection confirms a continuous, joint-free liner from end to end. You get the before and after footage, a written report and the 50-year liner warranty paperwork.

Finished cured pipe liner on site beside the relining van
Step 04
04 — Comparison

Relining against digging it up

Pipe relining compared with excavation
CriterionPipe reliningDig and replace
Time on site1–2 days3–5 days, often longer
Your drivewayUntouchedCut, removed, re-poured
Garden and pavingUntouchedExcavated and reinstated
Root re-entrySealed permanentlyReturns at the new joints
Reinstatement costNoneConcreting, paving, landscaping
Council permitsRarely neededOften needed for crossings
Warranty50 years on the linerWorkmanship only

Honest caveat: if a pipe has fully collapsed there is nothing left to line against, and we will tell you to dig. The camera decides, not the quote.

Still deciding? We wrote a longer breakdown in pipe relining versus pipe replacement.

05 — Specification

What we can line

Pipe materials
Terracotta, earthenware, PVC, concrete, cast iron
Diameters
50mm to 300mm
Runs
Sewer, stormwater, downpipes, boundary traps, junctions
Access
Through existing inspection points — no new pit in most cases
Depth
No practical limit on residential lines
Properties
Homes, units, body corporate, retail, schools, factories
Next

Related services and reading

CCTV drain inspection

Every liner starts with one

Read more

Tree root removal

What we do before the liner goes in

Read more

Sewer pipe repair

The most common line we reline

Read more

What pipe relining costs

What actually drives the price

Read more
Questions

No-Dig Pipe Relining — straight answers

How long does a no-dig pipe relining job take?

Most residential runs are done in one to two days, including the inspection, the clean and the cure. A single short section can be same-day. Commercial and multi-unit sites with several runs take longer, and we give you a day count in writing before we start.

Is the relined pipe as strong as a new one?

Structurally it is a standalone pipe in its own right — the liners we use are rated to carry load without the host pipe. That is why they carry a 50-year manufacturer warranty rather than a workmanship guarantee.

Does relining reduce the pipe's capacity?

The liner wall is a few millimetres thick, so the internal diameter drops slightly. In practice flow usually improves, because a smooth epoxy wall has far less friction than rough, scaled, root-filled terracotta.

Can you reline around bends and junctions?

Yes. Liners pull through bends, and junctions are reinstated with a robotic cutter once the resin has cured. Branch connections to a laundry or a downpipe are reopened before we leave, and we show you each one on camera.

Do I need council approval?

Not for relining inside your own boundary — nothing is excavated and nothing in the street is touched. Work on the sewer beyond the boundary trap is a water authority matter and we handle that conversation for you.

What happens to the old pipe?

It stays where it is and becomes the outer shell. That is the point: no spoil, no truck of broken terracotta, and no reinstating what you dug through to reach it.

Will I have to stop using the water?

Water stays connected. You avoid putting anything down the drain for a few hours while the resin cures, and we tell you the exact window before we start. Most households barely notice.

How soon can you get here?

We run three depots, Oakleigh, Essendon and Ivanhoe, and keep inspection slots open each day. Same-day CCTV is normal, and emergency calls are answered around the clock.

Book an inspection

Get the pipe looked at

Tell us what the drain is doing and we will book a CCTV inspection, usually same day. No charge, no obligation, and you keep the footage either way.

Oakleigh depot48 Downing Street, Oakleigh VIC 3166
Essendon depot65 Rose Street, Essendon VIC 3040
Ivanhoe depot26 Seddon Street, Ivanhoe VIC 3079
Mon – Fri6:30am – 7:00pm
Saturday7:00am – 5:00pm
Sunday8:00am – 4:00pm
Emergencies24 hours

We reply during business hours. Urgent? Call (03) 9059 2707 — answered 24/7 for emergencies. This site is protected by reCAPTCHA; the Google Privacy Policy and Terms apply.

Call (03) 9059 2707Free inspection